Harmonica Screws, pack of 400 (12.5 cents per screw)
Harmonica screws for Hohner, Seydel, Suzuki and Lee Oskar
Looking for Pozidriv? It doesn't matter what type of head is used: Slotted, Phillips, Pozidriv, etc... They all work. What's important to match is the size and length of the screw. I chose Phillips head screws because Pozidriv screwdrivers are harder to find. It makes life simple!
High-quality screws for any brand of harmonica. These screws are made from A2 Stainless Steel (304)
These screws can self-tap factory-new reed plates.
- M2 10 mm screw - as used in the Classic Hohner Special 20 harmonica, Suzuki harmonicas, Lee Oskar harps, Marine Band converted to screws and my custom harmonicas.
- M2 Nuts - Use a nut and bolt to hold cover plates. Can also be used to bolt the reed plates to the comb instead of tapping the reed plate.
Did you accidentally strip the reed plate thread? No problem. Use a nut instead.
- M1.6 10 mm screw - as used in Hohner Crossover, Golden Melody, MS series and Seydel harmonicas. These are also used in the new line of Special 20 and Rocket harmonicas from Hohner.
- M2 12 mm screw - Perfect for cover plates on Hohner Special 20, Marine Band 364/365 or other harps with thicker combs.
- M1.6 Nuts - Use a nut and bolt to hold cover plates. Can also be used to bolt the reed plates to the comb instead of tapping the reed plate
This is for a combination of 400 screws and nuts of any type. Please indicate the quantities you would like below.